《電子技術應用》
您所在的位置:首頁 > 测试测量 > 设计应用 > 基于RINSIM2.0仿真平台的安全级仪控系统的仿真应用研究
基于RINSIM2.0仿真平台的安全级仪控系统的仿真应用研究
电子技术应用
王飞1,叶潜2,3,吉艳红1,王思波1,崔伟伟2,余雷1,单福昌2,3
1.江苏核电有限公司;2.中核武汉核电运行技术股份有限公司; 3.中核核工业仿真技术重点实验室
摘要: 介绍了VVER堆型全范围模拟机基于国产化RINSIM2.0仿真平台的改造开发过程。由于原Linux平台与国产化平台在操作系统、编译器等方面存在显著差异,针对仿真模型、西门子安全级仪控(TXS)系统、通信接口、堆芯仪控系统以及教练员站等方面进行了深入的开发与改造并完成RINSIM2.0仿真平台集成。详细介绍了西门子安全级仪控系统在国产化平台的开发过程,在此基础上开展了瞬态测试验证,测试结果表明,国产化RINSIM2.0仿真平台的计算结果与原平台基本一致,验证了仿真平台国产化开发工作的成功,为中国核电VVER堆型全范围模拟机的数字化转型和集约化管理奠定了坚实基础。
中圖分類號:TL334 文獻標志碼:A DOI: 10.16157/j.issn.0258-7998.245819
中文引用格式: 王飛,葉潛,吉艷紅,等. 基于RINSIM2.0仿真平臺的安全級儀控系統的仿真應用研究[J]. 電子技術應用,2025,51(2):64-69.
英文引用格式: Wang Fei,Ye Qian,Ji Yanhong,et al. Research on the simulation application of the TELEPERM XS system based on the RINSIM2.0 simulation platform[J]. Application of Electronic Technique,2025,51(2):64-69.
Research on the simulation application of the TELEPERM XS system based on the RINSIM2.0 simulation platform
Wang Fei1,Ye Qian2,3,Ji Yanhong1,Wang Sibo1,Cui Weiwei2,Yu Lei1,Shan Fuchang2,3
1.Jiangsu Nuclear Power Corporation;2.China Nuclear Power Operation Technology Corporation;3.CNNC Key Lab on Nuclear Industry Simulation
Abstract: This paper introduces the development and modification process of the VVER type full slope simulator based on the RINSIM2.0 simulation platform. Due to significant differences in operating system, compiler and other aspects between the original Linux platform and the domestic platform, in-depth development has been carried out for simulation models, Siemens TELEPERM XS(TXS) system, communication interfaces, core instrumentation and control systems, and instructor station, which have been integrated into the RINSIM2.0 simulation platform. This paper provides a detailed introduction to the development process of the TXS system based on the domestic platform. On this basis, transient tests and verification have been carried out, and the results show that the calculation results of the domestic RINSIM2.0 simulation platform are basically consistent with the original platform, which verifies the success of the domestication work and lays a solid foundation for the digital transformation and intensive management of China Nation Nuclear Power on VVER type full slope simulators.
Key words : RINSIM2.0 simulation platform;TXS system;integrated application;comparison verification

引言

VVER型核電機組是中國從俄羅斯引進的先進核電技術之一,其全范圍模擬機對于機組運行人員的教學、培訓和研究具有至關重要的作用。為了推動VVER堆型模擬機技術的自主化和國產化進程,提高系統的可靠性和安全性,采用國產化的RINSIM2.0仿真平臺作為集成VVER堆型模擬機仿真系統的基礎支撐平臺。本文將深入介紹系統開發集成的關鍵環節,詳細分析安全級儀控系統的改造與開發工作。


本文詳細內容請下載:

http://www.ihrv.cn/resource/share/2000006327


作者信息:

王飛1,葉潛2,3,吉艷紅1,王思波1,崔偉偉2,余雷1,單福昌2,3

(1.江蘇核電有限公司,江蘇 連云港 222000;

2.中核武漢核電運行技術股份有限公司,湖北 武漢 435300;

3.中核核工業仿真技術重點實驗室,湖北 武漢 435300)


Magazine.Subscription.jpg

此內容為AET網站原創,未經授權禁止轉載。